Automation Mailing and Shipping Solutions

· Patented Differential Friction Technology™ for reliable product separation

· Feeds tall stack heights of 8.5 x 11 flat sheets with ease

· 24-inch (60.96 cm) capacity hopper with simple two-knob width adjustment

· No-slip adjustable feet for easy installation

· Simple adjustments make job setups and changeovers quick

· Variable angle feed belts enhance feeding performance

· Quality precision parts for long, trouble-free use

· Lightweight construction and integral lifting handle simplify moving and installation

· Variable speed control for synchronous operation

· Advancing gate enables operators to perform maintenance without stopping a job

· External run input for integrated start/stop control

· One knob adjustable width hopper with 1 inch (2.54 cm) material thickness capability

· Rollup adjustable height stand for use with inline tabbers, folders, and other types of ink jet printing bases

· Small product side guides for feeding material down to 2 inches (5.08 cm) wide

Maximum Material Size	12.26" x 14"
Minimum Material Size	3.75" W x 2.5"
Optional	2" x 2.5"
Thickness Range	.002" to .750"
Optional	.002" to 1"
Productivity	Up to 144,000/hr (business cards)
Belt Speed	9,000"/min.
Hopper Capacity	24"
Drive	DC motor
Power Input	115V 60Hz
Current	3 amps
Switches & Controls	Power On/Off Variable speed control Run delay External run input (optional)
Construction	Powder coated cold-rolled steel enclosure; aluminum base plate
Run Delay	Selectable (0-11 sec.)
Dimensions	17.9" x 15.62 x 26.75"
Weight (lbs)	39

Large (jumbo) format gripper arm inserters by Phillipsburg, Inserco, EMC, AMOS, and others (presentation mode)
Ink jet printing, labeling, and tabbing bases by Cheshire, Kirk Rudy, Buskro, MCS, Bryce, Datatech, Rena, and others (continuous mode)
Z-fold sheets, envelopes, slick stock, payment booklets, and other materials that are typically fed with difficulty

For use on large and "jumbo" format Phillipsburg, Inserco 1200 Series and similar type inserters AND Cheshire, Kirk Rudy, and Buskro ink jet printing/labeling bases and the Bryce 24KPS ink jet printing base
Simple selector switch quickly changes from "presentation" to "continuous" modes
Up to 144,000 piece/hour speed on printing, labeling, and tabbing bases (product dependent)
10,000 piece/hour speed on gripper arm inserters (product dependent)
Patented Differential Friction Technology™ for reliable product separation
Feeds tall stack heights of 8.5 x 11 (Reliant 2600) and A4 (Reliant 2700) sized sheets
24-inch (60.96 cm) capacity hopper with two-knob width adjustment
No-slip feet allows for quick and simple base mounting
Tool-free adjustments for fast setups and changeovers
Heavy-duty one piece powder coated steel enclosure
Built for rugged continuous use with quality precision parts
Operator safety guards over discharge and feed belts
Variable speed control for synchronous operation

Options

"Continuous" or "presentation" operation only
Vacuum table for printing, labeling, addressing, scanning, and tip-on applications
Rollup adjustable height stand for use with inline tabbers, folders, and other types of ink jet printing bases
Emergency stop button
One knob adjustable width material hopper with 1 inch (2.54 cm) material thickness capability

2600 Maximum Material Size	10.75" x 14"
2700 Maximum Material Size	11.75" x 14"
Minimum Material Size	3.75" x 2.5"
Optional	2" x 2.5"
Thickness Range	.002" to .250"
Optional	.002" to 1"
Printing/Labeling Productivity	Up to 144,000/hr (business cards)
Inserter Productivity	10,000/hour (product dependant)
Belt Speed	9,000"/min
Hopper Capacity	24"
Drive	Stepper motor
Power Input	115V/230V 50/60 Hz
Current	3 amps
Sensors	Diffuse reflective
Switches & Controls	Power On/Off Variable speed control Reset Fault indicator
Construction	Powder coated cold-rolled steel enclosure, aluminum base plate
Run Delay	Selectable (0-15 sec; 1.0 sec increments)
Ramp Delay	Selectable (0-5 sec; .5 sec increments)
2600 Overall Dimensions	21" x 12.25" x 26.5"
2700 Overall Dimensions	21" x 13.25" x 26.5"
2600 Weight (lbs)	57
2700 Weight (lbs)	59
Certification	CE

Automates delivery of non-nested products into wrapper and cartoner infeed conveyors
Collating warranty cards, wrapped/sleeved CDs, instruction sheets, and promotional material for software and computer packaging
Feeding chipboard backers and batch counting 8.5 x 11 (A4) sheets into wrapper for retail sale
Instruction manuals for electronics and appliance packaging
Corrugated backers, dividers, and other carton filler

Ideal for use with wrapper and cartoner infeed conveyors, and other types of packaging equipment that require high performance feeding automation
Patented Differential Friction Technology™ for reliable product separation
24-inch (60.96 cm) capacity hopper with easy one knob width adjustment
Accommodates tall stack heights of 8.5 x 11 and A4 sized sheets
Tool-free adjustments for quick and easy setups and changeovers
Heavy-duty one piece stainless steel enclosure
Built for rugged continuous use with quality precision parts
Operator safety guards over discharge and feeds belts
IQuipped™ with intelligent system control featuring a high performance embedded microprocessor
Bright, bold alphanumeric vacuum fluorescent display (VFD)
Real-time job performance indicators with a resettable counter
Fully configurable via simple 16-button keypad
Passcode protected access to system configurations
RS-232 communications for host system control

One shot or batch count modes
Double and low stack detection
3-color tower lamp
I/O pack provides a wide range of signal voltages for easy integration with host system
Rollup adjustable height stand for inline, right angle or straddle mounting
Vacuum and roller transports to imprint, label, scan, or to feed over conveyor guards
Verticle discharge to feed 90 degrees downward into top-opening packages
Catch tray for precision product placement and registration against conveyor lugs
Batch droppers to count, accumulate, and drop products at high speeds
Custom hardware and software for your special application requirements

Maximum Product Size:	11 3/4 in. W x 14 in. L (29.85 cm x 35.56 cm)
Minimum Product Size:	3 7/8 in. W x 2 1/2 in. L (9.84 cm x 6.35 cm)
Optional:	1 in. W x 2 1/2 in. L (2.54 cm x 6.35 cm)
Thickness Range:	.002 in. to 1 in. (.05 mm to 25.4 mm)
Belt Speed:	9,000 in./min. (228.59 m/min.)
Feed Rate (batch mode):	Up to 1,950 pieces/min. (10 business cards/batch)
Feed Rate (one shot mode):	Up to 750 pieces/min. (business cards)
Hopper Capacity:	24 in. (60.96 cm)
Display:	4-line by 20-character vacuum fluorescent
Keypad:	16-key tactile feel membrane
Drive:	Stepper motor
Power Input:	115V/230V 50/60 Hz
Current:	3 amps
Sensors:	Diffuse reflective
Construction:	Stainless steel enclosure; aluminum base plate
Communications:	RS-232
Flight Skips:	0 to 99 selectable
Batch Size (batch mode only):	1 to 9,999 pieces
Time Delays:	Flight or sheet selectable (10 ms to 9.9 sec.)
Feed Triggers:	Photo sensor, external contact, pieces/min. or time delay selectable
Acceleration:	Selectable
Slow Down (batch mode only):	Batch number and speed selectable
Overall Dimensions:	23 1/2 in. L (59.69 cm) 13 1/2 in. W (34.29 cm) 28 1/2 in. H (78.39 cm)
Weight:	67 lb. (30.31 kg)
Certification:	CE
Warranty:	One year limited warranty

Model	EASYFeed Lite Material Feeder	EASYFeed 120 Bow Separation Feeder	EASYFeed 200 Wide Format Bow Separation Feeder
Feeder Speed	Up to 20,000 pieces per hour	Up to 40,000 Postcards/hr	Up to 40,000 Postcards/hr
Material Size (W x L)	2" x 4" to 12" x 14"	3-1/8" x 2" to 12" x 17"	3-1/8" x 2" to 20" x 17"
Material Thickness	Up to 1/4"	Up to 1"	Up to 1"
Feeder Type	Friction Feed	Friction Feed w/Dual Repositionable Nylon Separation Assemblies. Utilizing Bow Separation™ Technology	Friction Feed w/Dual Repositionable Nylon Separation Assemblies. Utilizing Bow Separation™ Technology
Feeder Capacity	Up to 450 #10 Envelopes	Up to 625 #10 Envelopes	Up to 625 #10 Envelopes
Features	Remote Start/Stop Control; Auto Speed Synchronization/Manual Control Swithch	Remote Start/Stop Control; Job Setup: Material Job Function	Remote Start/Stop Control; Job Setup: Material Job Function
Duty Cycle	30 million pieces total or 500,000 per month over a 5 year life cycle	240 million addresses total or 4,000,000 per month over a 5 year life cycle	240 million addresses total or 4,000,000 per month over a 5 year life cycle
Dimensions	18" D x 13" W x 18" H	14 1/2" W x 17" L x 19" H	14 1/2" W x 17" L x 19" H
Weight	25 lbs	36 lbs	36 lbs
Electrical	120VAC 3A 50/60 Hz	120VAC 5A 50/60 Hz; Optional 220 VAC 5A 50/60 HZ	120VAC 5A 50/60 Hz; Optional 220 VAC 5A 50/60 HZ
Options		Console Base Floor Stand; Rise Stand	Console Base Floor Stand; Rise Stand
All Specifications Subject To Change Without Notice

1138 West 9th Street

1138 West 9^th Street